18RG info and specs need 2tg and 3tg (2024)

  • Forum
  • Tech and Conversions Section
  • Tech and Conversions
  • 18RG info and specs need 2tg and 3tg

Results 1 to 15 of 28

  • Thread Tools
    • Show Printable Version
  1. 20-12-2005,09:43 PM#1

    barned01

    • View Profile
    • View Forum Posts
    • Private Message

    18RG info and specs need 2tg and 3tg (4)

    Junior MemberDomestic Engineer18RG info and specs need 2tg and 3tg (5)18RG info and specs need 2tg and 3tg (6)18RG info and specs need 2tg and 3tg (7)18RG info and specs need 2tg and 3tg (8)18RG info and specs need 2tg and 3tg (9)18RG info and specs need 2tg and 3tg (10)18RG info and specs need 2tg and 3tg (11)18RG info and specs need 2tg and 3tg (12)18RG info and specs need 2tg and 3tg (13)18RG info and specs need 2tg and 3tg (14)18RG info and specs need 2tg and 3tg (15)

    Join Date
    Sep 2005
    Location
    south australia
    Posts
    609

    18RG info and specs need 2tg and 3tg (16) 18RG info and specs need 2tg and 3tg

    18RC engine 1968CC
    Spark Plug type: NGK BPR5EA-L .8mm gap
    Ignition timing: 7 degrees BTDC
    firing order: 1-3-4-2
    Intake clearance (warm): 0.2mm
    exhaust clearance (warm): 0.36mm
    idle speed: 750RPM +/-50rpm
    compression std: 163.1psi +/- 14.2 psi (127.8 limit)
    Thermostat opening temperature: ~88 degrees celsius
    Tightening Torque's:
    Head: 72.3-86.8 ft-lb
    Camshaft Bearing Cap: 12.3-16.6 ft-lb
    Crank bearing cap: 68.7-83.2 ft-lb
    Rod Cap: 39.1-47.7 ft-lb

    18RG engine 1968CC
    Spark Plug Type: NGK bpr6ey .7-.8mm gap
    Ignition timing: 12 degrees BTDC
    firing order: 1-3-4-2
    Intake clearance (cold): 0.26mm - 0.32mm
    Exhaust Clearance (cold): 0.31mm - 0.36mm
    initial idle speed: 1000RPM +/-50RPM
    Compression std: 170psi +/-14psi (142 psi limit)
    Thermostat opening temperature: ~82 degrees celsius
    Tightening torque's:
    Head: 52.1-63.7 ft-lb
    camshaft bearing caps: 12-15 ft-lb
    crank bearing caps: 72.3-79.6 ft-lb
    rod caps: 46.3-50.6 ft-lb
    crankshaft pulley: 87-108 ft-lb
    flywheel: 59.3-63.7 ft-lb
    Oil Capacity: 4.7 Litres dry refill

    7MGTE
    Tightening Torque's
    Head: 58ft-lb...from toyota repair manual...may want to go a little higher

    T series
    http://toymods.net/forums/showthread.php?t=1139
    river is the bestest

    the above 18r specs taken from green book.
    K series, M series, UZ series, JZ series, ZZ series still wanted.
    i will edit this post if you feel i should add other specific data to it that might be helpful.

    Last edited by barned01; 12-04-2006 at 11:00 PM.Reason: update info

    Reply With Quote

  2. 21-12-2005,07:38 AM#2

    Lambolica

    • View Profile
    • View Forum Posts
    • Private Message

    18RG info and specs need 2tg and 3tg (18)

    Toymods Club Member #194Conversion King18RG info and specs need 2tg and 3tg (19)18RG info and specs need 2tg and 3tg (20)18RG info and specs need 2tg and 3tg (21)18RG info and specs need 2tg and 3tg (22)18RG info and specs need 2tg and 3tg (23)18RG info and specs need 2tg and 3tg (24)18RG info and specs need 2tg and 3tg (25)18RG info and specs need 2tg and 3tg (26)18RG info and specs need 2tg and 3tg (27)18RG info and specs need 2tg and 3tg (28)18RG info and specs need 2tg and 3tg (29)

    Join Date
    Jul 2005
    Location
    NSW
    Posts
    2,111

    18RG info and specs need 2tg and 3tg (31) Re: 18RG info and specs need 2tg and 3tg

    This is the start of somthing good. I'm in the process of collecting similar data for alot of engines to post (as well as gearboxes) for the home mechanic.

    Might want to add also
    Oil Capacity
    Bore and stroke (as well as the the engine type ie 253)
    And possibly some comments on basic performance parts (particularly for the harder to source parts for engines)

    Beige.... The new Black!!!

    Reply With Quote

  3. 21-12-2005,11:58 AM#3

    barned01

    • View Profile
    • View Forum Posts
    • Private Message

    18RG info and specs need 2tg and 3tg (33)

    Junior MemberDomestic Engineer18RG info and specs need 2tg and 3tg (34)18RG info and specs need 2tg and 3tg (35)18RG info and specs need 2tg and 3tg (36)18RG info and specs need 2tg and 3tg (37)18RG info and specs need 2tg and 3tg (38)18RG info and specs need 2tg and 3tg (39)18RG info and specs need 2tg and 3tg (40)18RG info and specs need 2tg and 3tg (41)18RG info and specs need 2tg and 3tg (42)18RG info and specs need 2tg and 3tg (43)18RG info and specs need 2tg and 3tg (44)

    Join Date
    Sep 2005
    Location
    south australia
    Posts
    609

    18RG info and specs need 2tg and 3tg (45) Re: 18RG info and specs need 2tg and 3tg

    do you have the 2t and 3t series, I can probably pull them off the old forums, but i assume there must be some sort of workshop manual around for these engines as well.

    Reply With Quote

  4. 21-12-2005,12:06 PM#4

    Lambolica

    • View Profile
    • View Forum Posts
    • Private Message

    18RG info and specs need 2tg and 3tg (47)

    Toymods Club Member #194Conversion King18RG info and specs need 2tg and 3tg (48)18RG info and specs need 2tg and 3tg (49)18RG info and specs need 2tg and 3tg (50)18RG info and specs need 2tg and 3tg (51)18RG info and specs need 2tg and 3tg (52)18RG info and specs need 2tg and 3tg (53)18RG info and specs need 2tg and 3tg (54)18RG info and specs need 2tg and 3tg (55)18RG info and specs need 2tg and 3tg (56)18RG info and specs need 2tg and 3tg (57)18RG info and specs need 2tg and 3tg (58)

    Join Date
    Jul 2005
    Location
    NSW
    Posts
    2,111

    18RG info and specs need 2tg and 3tg (60) Re: 18RG info and specs need 2tg and 3tg

    At the moment I just have a list of all popular Toyota engines and under each engine I've started compiling the similar info to what is above. I don't have it with me at the moment but I'll have a llook see at home, I might have a green book with some of the specs in it.

    From time to time I get on the net and search that info in 1 particular engine to fill in the blanks so mine is a work in progress. It will get there one day.

    Beige.... The new Black!!!

    Reply With Quote

  5. 21-12-2005,03:17 PM#5

    The Witzl

    18RG info and specs need 2tg and 3tg (62)

    MR 18RGChief Engine Builder18RG info and specs need 2tg and 3tg (63)18RG info and specs need 2tg and 3tg (64)18RG info and specs need 2tg and 3tg (65)18RG info and specs need 2tg and 3tg (66)18RG info and specs need 2tg and 3tg (67)18RG info and specs need 2tg and 3tg (68)18RG info and specs need 2tg and 3tg (69)18RG info and specs need 2tg and 3tg (70)18RG info and specs need 2tg and 3tg (71)18RG info and specs need 2tg and 3tg (72)18RG info and specs need 2tg and 3tg (73)

    Join Date
    Jul 2005
    Location
    NSW
    Posts
    3,164

    18RG info and specs need 2tg and 3tg (75) Re: 18RG info and specs need 2tg and 3tg

    Part number for Toyota 18R-G oil filter = 15601 - 33021

    ...... butt scratcher?!

    Reply With Quote

  6. 21-12-2005,05:23 PM#6

    SeptemberSquall

    • View Profile
    • View Forum Posts
    • Private Message

    18RG info and specs need 2tg and 3tg (77)

    Aerial SuperponyDomestic Engineer18RG info and specs need 2tg and 3tg (78)18RG info and specs need 2tg and 3tg (79)18RG info and specs need 2tg and 3tg (80)18RG info and specs need 2tg and 3tg (81)18RG info and specs need 2tg and 3tg (82)18RG info and specs need 2tg and 3tg (83)18RG info and specs need 2tg and 3tg (84)18RG info and specs need 2tg and 3tg (85)18RG info and specs need 2tg and 3tg (86)18RG info and specs need 2tg and 3tg (87)18RG info and specs need 2tg and 3tg (88)

    Join Date
    Sep 2005
    Location
    Victoria
    Posts
    730

    18RG info and specs need 2tg and 3tg (90) Re: 18RG info and specs need 2tg and 3tg

    18RG info and specs need 2tg and 3tg (91) Originally Posted by The Witzl

    Part number for Toyota 18R-G oil filter = 15601 - 33021

    How recently did you buy an oil filter with that p/n?

    Reply With Quote

  7. 21-12-2005,06:09 PM#7

    Steve M

    • View Profile
    • View Forum Posts
    • Private Message

    18RG info and specs need 2tg and 3tg (93)

    I'm noDomestic Engineer18RG info and specs need 2tg and 3tg (94)18RG info and specs need 2tg and 3tg (95)18RG info and specs need 2tg and 3tg (96)18RG info and specs need 2tg and 3tg (97)18RG info and specs need 2tg and 3tg (98)18RG info and specs need 2tg and 3tg (99)18RG info and specs need 2tg and 3tg (100)18RG info and specs need 2tg and 3tg (101)18RG info and specs need 2tg and 3tg (102)18RG info and specs need 2tg and 3tg (103)18RG info and specs need 2tg and 3tg (104)

    Join Date
    Nov 2005
    Location
    South Australia
    Posts
    614

    18RG info and specs need 2tg and 3tg (106) Re: 18RG info and specs need 2tg and 3tg

    Good thread to see start up, the only issue I have is that those numbers obviously come from the late model "green book", which has figures only for engines later than the 88250 head.

    Here are the specs from my green book, the 1977 version, 88250, 9.7:1CR motor pictured in diagrams.

    Spark Plug: ND W20EXR or NGK BPR-6EZ (note, we run BPR7ey and engine didn't run over as much in hot weather)
    Spark Plug gap: 0.9 - 1.0mm
    Ignition timing: 5 Degrees BTDC (static)
    Firing Order: 1-3-4-2
    Intake clearance (cold): 0.26mm - 0.32mm
    Exhaust Clearance (cold): 0.31mm - 0.36mm
    Initial Idle Speed: 1000RPM +/- 50RPM
    Compression STD: 184.6psi (142psi limit, 14.2psi between cylinders)
    Thermostat opening temp: start: 80.5 - 83.5 deg.C, Fully open: 95 deg.C
    Tightening torques:
    Cylinder Head bolts: 52.1 - 63.7 ft-lb.
    Camshaft Bearing Cap nuts: 12.3 - 16.6 ft-lb.
    Crankshaft Bearing Cap bolts: 72.3 - 79.6 ft-lb.
    Rod Cap nuts: 46.3 - 50.6 ft-lb.
    Crankshaft pulley bolt: 71.6 - 73.1 ft-lb.
    Flywheel bolts: 59.3 - 63.7 ft-lb.
    Oil Capacity: 4.7 litres total, 4.2 litres crankcase
    Coolant Capacity: 9.1 litres

    Dizzy points gap: 0.45mm

    Last edited by Steve M; 21-12-2005 at 06:13 PM.Reason: spelling

    Strong like horse, smort like tractor!18RG info and specs need 2tg and 3tg (107)
    (\__/)
    (='.'=)
    (")_(")

    Reply With Quote

  8. 21-12-2005,06:13 PM#8

    The Witzl

    18RG info and specs need 2tg and 3tg (109)

    MR 18RGChief Engine Builder18RG info and specs need 2tg and 3tg (110)18RG info and specs need 2tg and 3tg (111)18RG info and specs need 2tg and 3tg (112)18RG info and specs need 2tg and 3tg (113)18RG info and specs need 2tg and 3tg (114)18RG info and specs need 2tg and 3tg (115)18RG info and specs need 2tg and 3tg (116)18RG info and specs need 2tg and 3tg (117)18RG info and specs need 2tg and 3tg (118)18RG info and specs need 2tg and 3tg (119)18RG info and specs need 2tg and 3tg (120)

    Join Date
    Jul 2005
    Location
    NSW
    Posts
    3,164

    18RG info and specs need 2tg and 3tg (122) Re: 18RG info and specs need 2tg and 3tg

    I bought an oil filter with that Part number TODAY, and read the p/n off the invoice and oil filter itself.

    I know, it looks quite different to a 4A, 3S or 1UZ oil filter part number.....

    ...... butt scratcher?!

    Reply With Quote

  9. 21-12-2005,06:24 PM#9

    SeptemberSquall

    • View Profile
    • View Forum Posts
    • Private Message

    18RG info and specs need 2tg and 3tg (124)

    Aerial SuperponyDomestic Engineer18RG info and specs need 2tg and 3tg (125)18RG info and specs need 2tg and 3tg (126)18RG info and specs need 2tg and 3tg (127)18RG info and specs need 2tg and 3tg (128)18RG info and specs need 2tg and 3tg (129)18RG info and specs need 2tg and 3tg (130)18RG info and specs need 2tg and 3tg (131)18RG info and specs need 2tg and 3tg (132)18RG info and specs need 2tg and 3tg (133)18RG info and specs need 2tg and 3tg (134)18RG info and specs need 2tg and 3tg (135)

    Join Date
    Sep 2005
    Location
    Victoria
    Posts
    730

    18RG info and specs need 2tg and 3tg (137) Re: 18RG info and specs need 2tg and 3tg

    18RG info and specs need 2tg and 3tg (138) Originally Posted by The Witzl

    I bought an oil filter with that Part number TODAY, and read the p/n off the invoice and oil filter itself.

    I know, it looks quite different to a 4A, 3S or 1UZ oil filter part number.....

    I only ask as T motors used to have a p/n in that style. It was supersceeded by a new-style part number 12345-AB678 years and years ago. The new part number is shared with JZ, M, MZ etc. engines, but the old part number 12345-67890 still refers to the new filter as a replacement.

    Reply With Quote

  10. 21-12-2005,08:58 PM#10

    river

    • View Profile
    • View Forum Posts
    • Private Message

    18RG info and specs need 2tg and 3tg (140)

    Toymods Net NaziToo Much Toyota18RG info and specs need 2tg and 3tg (141)18RG info and specs need 2tg and 3tg (142)18RG info and specs need 2tg and 3tg (143)18RG info and specs need 2tg and 3tg (144)18RG info and specs need 2tg and 3tg (145)18RG info and specs need 2tg and 3tg (146)18RG info and specs need 2tg and 3tg (147)18RG info and specs need 2tg and 3tg (148)18RG info and specs need 2tg and 3tg (149)18RG info and specs need 2tg and 3tg (150)18RG info and specs need 2tg and 3tg (151)

    Join Date
    Sep 2005
    Location
    NSW
    Posts
    7,061

    18RG info and specs need 2tg and 3tg (153) Re: 18RG info and specs need 2tg and 3tg

    Hi,

    I've got the Tractorworks Toyota Celica (TA22) Factory Manual. It's got freaking everyhting there, and I mean everything. This includes the 2T, 2TB and 2TG engines - full breakdown, pics, SSTs, specs, torque settings, tests etc. It also has it for the steering, suspension, brakes, 4 and 5 speed gearboxes and the auto. Plus it has the body work, electrical system, wiring diagrams.

    Anyhting and everything you need to know about the TA22 is in there. Problem is it's a huge book and, me being in Adelaide, means that I do not have the ability to scan it.

    However, fear not, 'cos I have scanned the entire section on the 2TG engine. If someone would like to show or tell me how to upload a few gig of vital 2TG information to the forum I'll give it a whilr over the next few days - seeing I'm back in Sydney.

    seeyuzz
    river

    The thinking man's clown and the drinking woman's sex symbol
    RA25GT - There is no substitute | 18R-G - Toyota's Dependable Masterpiece
    Toymods Car Club Treasurer, assistant Historic Plate Registrar & Forums Admin

    Reply With Quote

  11. 21-12-2005,09:29 PM#11

    scootaphill

    • View Profile
    • View Forum Posts
    • Private Message

    18RG info and specs need 2tg and 3tg (155)

    Forum MemberGrease Monkey18RG info and specs need 2tg and 3tg (156)

    Join Date
    Sep 2005
    Location
    victoria
    Posts
    51

    18RG info and specs need 2tg and 3tg (158) Re: 18RG info and specs need 2tg and 3tg

    But where do I/WE find info on the ever elusive 18R-GEU. Even on the cd's (that i dont have and dont exist) the R-GEU section has NO images. i have EPC pics now but no real data on the efi side of things only part numbers. its like this motor never existed...

    Is there a GREEN bible that covers teh 18R-GEU?

    ON HOLD Current Project 1UZ-FE Powered Buggy
    Last Project 18R-GEU time to tinker

    EDITED ITS ALL VERY LAMO

    Reply With Quote

  12. 21-12-2005,09:50 PM#12

    Steve M

    • View Profile
    • View Forum Posts
    • Private Message

    18RG info and specs need 2tg and 3tg (160)

    I'm noDomestic Engineer18RG info and specs need 2tg and 3tg (161)18RG info and specs need 2tg and 3tg (162)18RG info and specs need 2tg and 3tg (163)18RG info and specs need 2tg and 3tg (164)18RG info and specs need 2tg and 3tg (165)18RG info and specs need 2tg and 3tg (166)18RG info and specs need 2tg and 3tg (167)18RG info and specs need 2tg and 3tg (168)18RG info and specs need 2tg and 3tg (169)18RG info and specs need 2tg and 3tg (170)18RG info and specs need 2tg and 3tg (171)

    Join Date
    Nov 2005
    Location
    South Australia
    Posts
    614

    18RG info and specs need 2tg and 3tg (173) Re: 18RG info and specs need 2tg and 3tg

    I would like to get my hands on the efi book too, but also the emmission control manual and the emission control computer.

    I only know one of the specs for the EFI kit, that's the details of the TPS/throttlebody and how it compares to a 5ME or 22RE (late???) version.

    The 18RGEU TPS I have (89452-14010) has its first stage at 1-5 degrees open (same as 5ME early) and its second stage at 20 degrees open (5ME early has second stage set to 60degrees open).
    The 18RGEU TPS has 18.5 written on the rotor, the 5ME TPS (89452-14020) has 58.5 written on the rotor.
    I reckon if you could find a "big square type" TPS with 20 degrees written on the cover plate, you would have a direct replacement.
    Anyone able to read their 2TGEU/3TGTEU TPS numbers?
    Both 18RGEU and 5ME models looked at were three pin type.

    18RGEU throttle body size (p/n 22210-34070) = 60mm (5ME early p/n 22210-43270 is also 60mm and has same bolt pattern. Linkages on wrong side though).
    22RE throttle body (35130-5J16) is 55mm and uses four pin TPS 89452-28030. Bolt pattern is same, TPS not compatible with 18RGEU loom. Linkages on correct side though.

    Strong like horse, smort like tractor!18RG info and specs need 2tg and 3tg (174)
    (\__/)
    (='.'=)
    (")_(")

    Reply With Quote

  13. 21-12-2005,10:31 PM#13

    Mr DOHC

    • View Profile
    • View Forum Posts
    • Private Message

    18RG info and specs need 2tg and 3tg (176)

    RIP Scott KalittaAutomotive Encyclopaedia18RG info and specs need 2tg and 3tg (177)18RG info and specs need 2tg and 3tg (178)18RG info and specs need 2tg and 3tg (179)18RG info and specs need 2tg and 3tg (180)18RG info and specs need 2tg and 3tg (181)18RG info and specs need 2tg and 3tg (182)18RG info and specs need 2tg and 3tg (183)18RG info and specs need 2tg and 3tg (184)18RG info and specs need 2tg and 3tg (185)18RG info and specs need 2tg and 3tg (186)18RG info and specs need 2tg and 3tg (187)

    Join Date
    Oct 2005
    Location
    QLD
    Posts
    1,234

    18RG info and specs need 2tg and 3tg (189) Re: 18RG info and specs need 2tg and 3tg

    the 18RG is a 2 litre toyota motor

    JZX83+ FMIC+ Twin 2.5" dumps to 3"+ FCD+ 2800rpm stallie+ 14psi - LSD - good tyres = 12.85 @105.58

    The boobs are back

    Reply With Quote

  14. 21-12-2005,10:57 PM#14

    brett_celicacoupe

    • View Profile
    • View Forum Posts
    • Private Message

    18RG info and specs need 2tg and 3tg (191)

    UserConversion King18RG info and specs need 2tg and 3tg (192)18RG info and specs need 2tg and 3tg (193)18RG info and specs need 2tg and 3tg (194)18RG info and specs need 2tg and 3tg (195)18RG info and specs need 2tg and 3tg (196)18RG info and specs need 2tg and 3tg (197)18RG info and specs need 2tg and 3tg (198)18RG info and specs need 2tg and 3tg (199)18RG info and specs need 2tg and 3tg (200)18RG info and specs need 2tg and 3tg (201)18RG info and specs need 2tg and 3tg (202)

    Join Date
    Oct 2005
    Location
    NWA
    Posts
    2,885

    18RG info and specs need 2tg and 3tg (203) Re: 18RG info and specs need 2tg and 3tg

    18RG info and specs need 2tg and 3tg (204) Originally Posted by brett_celicacoupe

    thought i might add this link i found a while back.

    not sure where it came from or if any1 already found it but anyway;

    http://users.on.net/~csharman/docs/18rgeu.pdf

    this one might be helpful for the 18rgeu part no.s

    hello

    Reply With Quote

  15. 21-12-2005,10:59 PM#15

    barned01

    • View Profile
    • View Forum Posts
    • Private Message

    18RG info and specs need 2tg and 3tg (206)

    Junior MemberDomestic Engineer18RG info and specs need 2tg and 3tg (207)18RG info and specs need 2tg and 3tg (208)18RG info and specs need 2tg and 3tg (209)18RG info and specs need 2tg and 3tg (210)18RG info and specs need 2tg and 3tg (211)18RG info and specs need 2tg and 3tg (212)18RG info and specs need 2tg and 3tg (213)18RG info and specs need 2tg and 3tg (214)18RG info and specs need 2tg and 3tg (215)18RG info and specs need 2tg and 3tg (216)18RG info and specs need 2tg and 3tg (217)

    Join Date
    Sep 2005
    Location
    south australia
    Posts
    609

    18RG info and specs need 2tg and 3tg (218) Re: 18RG info and specs need 2tg and 3tg

    river where are you bunking? i could pick it up assuming it is on cd and have a skim through and add the relevant information to the post.

    steve, your measurment's seem "tighter" so i will add them to the top post in the very near future as those measurements would accomodate for all the other 18rg variants.

    I might chuck the 18RC up as well when i do the updating.

    Reply With Quote

Quick NavigationTech and ConversionsTop

  • Site Areas
  • Settings
  • Private Messages
  • Subscriptions
  • Who's Online
  • Search Forums
  • Forums Home
  • Forums
  • Toymods Car Club
    1. Toymods Car Club Membership and Feedback
  • Tech and Conversions Section
    1. Tech and Conversions
      1. FAQ
      2. Dyno Results
    1. Cruises and Events
      1. Interstate Events
        1. ACT Events
        2. Queensland Events
        3. Victorian Events
        4. South Australian Events
        5. Western Australian Events
        6. Northern Territory Events
        7. Tasmanian Events
      2. Previous NSW Events
  • Historic Registration
    1. Historic Registration Info and Details
  • General Discussion Area
  • Toymods Forum Sponsors
    1. Otomoto
    2. Amayama
    3. BENDIX
    4. Bridgestone
    5. MRP LTD - Manon Racing Products
    6. All Wheels Australia
    7. CarCareProducts
    8. Automotive catalogues and specials‏
  • Toymods Marketplace
    1. Toyotas for Sale
    2. Cars and Parts Wanted
  • Old Toymods Forum

«Previous Thread|Next Thread»

Bookmarks

Bookmarks
  • Digg
  • del.icio.us
  • StumbleUpon
  • Google

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  • BB code is On
  • Smilies are On
  • [IMG] code is On
  • [VIDEO] code is On
  • HTML code is Off

Forum Rules

  • Contact Us
  • Toymods Car Club
  • Top

All times are GMT +10. The time now is 09:32 PM.

Powered by vBulletin® Version 4.2.3
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.

18RG info and specs need 2tg and 3tg (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Maia Crooks Jr

Last Updated:

Views: 5591

Rating: 4.2 / 5 (63 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Maia Crooks Jr

Birthday: 1997-09-21

Address: 93119 Joseph Street, Peggyfurt, NC 11582

Phone: +2983088926881

Job: Principal Design Liaison

Hobby: Web surfing, Skiing, role-playing games, Sketching, Polo, Sewing, Genealogy

Introduction: My name is Maia Crooks Jr, I am a homely, joyous, shiny, successful, hilarious, thoughtful, joyous person who loves writing and wants to share my knowledge and understanding with you.